VERSIFOAM #15 CLASS-1 FIRE (1.75 PCF W/KIT) (198 BF)

MacArthur #: 90A2701006

Manufacturer #: CL15

VersiFoam Class I System 15 - will produce 198 square feet of cured foam at a 1" thickness, or 16.5 cubic feet. 

Country of Origin: USA

U/M:  Kit

Net weight:  41

Gross weight:  41

Pieces per carton:  1

R-Value:  6.7 per inch

Fire Rating:  20 flamespread 300 smoke developed

Length (in.):  9

Series:  System 15

Width (in.):  18.5

Height (in.):  16

Warranty:  RHH Foam System, Inc. (“RHH”) warrants product to be free of material defects until the “Use By” date stamped on the carton. Product must be applied in accordance with the proper application procedures, and for the intended use as stated on the label. To the fullest extent allowed by applicable law, the foregoing limited warranty is the purchaser’s exclusive remedy and supersedes and is expressly in lieu of any other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular purpose. In no event shall RHH be liable for any special, incidental, indirect, or consequential damages whatsoever no matter how caused, and whether or not for negligence or otherwise. Any liability for loss or damage or defective goods, irrespective of whether such defects are discoverable or latent, shall in no event exceed the purchase price of the particular goods with respect to which losses or damages are claimed, or, at the election of the distributor, repair or replacement of defective or damaged goods. The Product is further subject to RHH’s standard terms and conditions which can be found at versifoam.com and are hereby incorporated herein by this reference.

Weight Per Unit (LB):  40

Versi-Foam® Systems 1 Class I, 9 Class I, 15 Class I, and 50 Class I are disposable, closed-cell, low-pressure spray foam kits consisting of two chemical components (Component A: isocyanate and Component B: polyol blend), patented U-Control dispensing gun, two multi-purpose mixing nozzles (System 1) or ten multi-purpose mixing nozzles (Systems 9, 15 and 50), nitrile gloves, and packet of petroleum jelly. These systems contain a flame retardant formula, meeting requirements of ASTM E-84 as a Class I product. They do not require any external power source