Carlisle’s Sure-White EPDM Pressure-Sensitive (PS) Elastoform Flashing is a nominal 60-mil-thick (1.5 mm)-thick, uncured EPDM membrane, laminated to a nominal 30-mil-thick (0.75 mm), fully cured PS adhesive. This product is available in 6" x 100', 9" x 50', 12" x 50' rolls and is easily malleable and highly adaptable to irregular shapes and surfaces. PS Elastoform Flashing is self curing and can be used to flash pipes and scuppers, as well as other rooftop structures and penetrations. The clear poly release liner on the 12"-wide product is pre-slit down the center, allowing the applicator to partially remove the liner for ease of installation.