THERMAFLEX DUCT FLEX UNINSULATED STL 18"X15' (1 PC/CT)

MacArthur #: 30A2301008

Manufacturer #: 052618000002

Manufacturer Product Family: Flexible Duct

Country of Origin: USA

U/M: Piece

Net weight: 15.72

Gross weight: 15.72

Inside Diameter: 18

Color: Gray

Pieces per carton: 1

Feet per carton: 15

R-Value: 0

Fire Rating: 25/50

Length (Ft): 15

Series: S-TL

Warranty: Warranty The first five years of installation in the case of any warranty issue or product failure, Thermaflex® will cover all duct cost, material cost and any reasonable labor cost, provided the Flex-Vent® product was properly installed in accordance with our written installation. For the second five years of installation, for a maximum of ten and in the event of any Flex-Vent® product failure or warranty issue, Thermaflex® will make replacement of the defective duct only and no other cost will be reimbursed.

Non-insulated UL181 Class 1 flexible air duct, extremely strong with heavy fiberglass cloth fabric permanently bonded to a corrosion resistant spring steel wire helix. For all pressure heating and cooling systems. A superior alternative in applications where insulated duct is not required or cannot be used, e.g., clean room applications. Unlike connector-rated products, S-TL is not limited to length of run.

Thermaflex® S-TL air duct is used in either supply or return sections: for branch ducts and duct connections to or between mixing units induction units, control or terminal units and diffusion devices, including light troffers. Thermaflex® S-TL air duct provides economical means for handling misalignment between system components and ducting around obstacles where fabricated and fitted ducts are difficult and costly to install. This duct is equally suitable for new jobs or refit work, and is especially useful when making system extensions or changing conditioned zones now or in the future.